You are here: Home » NEWS »

Advantages of Aluminum Honeycomb Composite Panels

Aluminum honeycomb composite board is a new composite material with sandwich structure. It is the application of aviation and aerospace materials in the construction field. It consists of two layers of aluminum and aluminum sheets laminated with aluminum honeycomb core through adhesive or film. Aluminum Composite Panels Factory to share the advantages of aluminum honeycomb composite panels.
(1) Lightweight. The standard board weighs only 16kg per square meter, which is equivalent to 6mm thick glass, only 1/5 of the weight of the same thickness stone.
(2) Impact resistance. The impact strength is 10 times larger than that of 3mm thick granite, and it will not be broken after impact. It is only partially broken at the impact. After 120 cycles of the acid freeze-thaw test (-25~50 degrees Celsius), the strength is not reduced. It is a good decorative material for high-rise buildings.
(3) Any kind of stone can be used as the surface. The stone can be treated in any way to ensure that chromatic aberrations, cracks, etc. are minimized.
(4) Easy to install. The Aluminum Honeycomb Composite Panel is extremely easy to install and can be pre-installed according to customer requirements. In general, large installation equipment is not required. At a lower level, only simple tools are required. This product is suitable for modular unitized curtain wall installations. Since the weight of the material is greatly reduced, the ordinary adhesive can be conveniently fixed on the wall, the installation is simple, the auxiliary material is small, the time and labor are saved, and the installation cost is reduced.

Aluminum Honeycomb Panel

(5) Sound insulation and heat insulation are good. After testing, it’s sound insulation and heat insulation effect are better than 30mm thick natural stone board. The specifications of the stone aluminum honeycomb composite panel can be arbitrarily changed. The standard board size is 1200mm x 2400mm, and the thickness is 20mm for the standard board, 4mm for stone, 14mm for aluminum honeycomb, and 2mm for high-strength transition layer and glue layer.
Natural stone panels can be made of marble or granite. Apply high-strength glass fiber film on one side of Aluminum Honeycomb Panel, apply high-strength glass fiber film on epoxy resin film on the other side, and evenly apply epoxy resin glue on glass fiber film and put on the stone board. Then repeat the previous process on the stone board to form a sandwich structure.